CHEMTRONICS INC -- TF SOLVENT C880  -- 6850-01-099-9842
<pre>=====================  Product Identification  =====================

Product ID:TF SOLVENT C880
MSDS Date:01/01/1991
FSC:6850
NIIN:01-099-9842
=== Responsible Party ===
Company Name:CHEMTRONICS INC
Address:8125 COBB CENTERR ROAD
City:KENNESAW
State:GA
ZIP:30144
Country:US
Info Phone Num:404-424-4888
Emergency Phone Num:404-424-4888
CAGE:2M589
=== Contractor Identification ===
Company Name:CHEMTRONICS INC
Address:8125 COBB CENTER DRIVE
Box:City:KENNESAW
State:GA
ZIP:30152
Country:US
Phone:770-424-4888/800-645-5244
CAGE:21267
Company Name:CHEMTRONICS INC (CANCELLED USE 21267)
City:HAUPPAUGE
State:NY
ZIP:11760
Country:US
CAGE:2M589

=============  Composition/Information on Ingredients  =============

Ingred Name:1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE (FREON 113)  (SARA
    III)
CAS:76-13-1
RTECS #:KJ4000000
Other REC Limits:NONE SPECIFIED
OSHA PEL:1000PPM/1250STEL
ACGIH TLV:1000PPM/1250STEL9192
Ozone Depleting Chemical:1

Ingred Name:CARBON DIOXIDE
CAS:124-38-9
RTECS #:FF6400000
Other REC Limits:NONE SPECIFIED
OSHA PEL:5000 PPM
ACGIH TLV:5000PPM/30000STEL;93

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION- VAPOR IS HEAVIER THAN AIR
    AND CAN CAUSE SUFFOCATION BY REDUCING OXYGEN AVAILABLE FOR
    BREATHING.	EYES- LIQUID CONTACT CAN CAUSE DISCOMFORT.  SKIN-
    REPEATED LIQUID CONTACT CAN CAUSE DEFATTI NG OF THE SKIN.
Effects of Overexposure:INHALATION- LIGHT-HEADEDNESS, GIDDINESS,
    SHORTNESS OF BREATH AND MAY LEAD TO NARCOSIS, CARDIAC
    IRREGULARITIES, UNCONSCIOUSNESS OR DEATH.  SKIN- IRRITATION OR
    REDNESS.  INGESTION- MAY CAUSE NAUSEA AND  VOMITING.  EYES- MAY
    CAUSE TEMPORARY DISCOMFORT.
Medical Cond Aggravated by Exposure:CARDIOVASCULAR DISEASE.

=======================  First Aid Measures  =======================

First Aid:INHALATION- REMOVE TO FRESH AIR AND CALL A PHYSICIAN. ASSIST
    WITH BREATHING SUPPORT MEASURES IF NEEDED.	SKIN- FLUSH WITH WATER.
    IF IRRITATION OCCURS OR PERSISTS, SEEK MEDICAL ATTENTION.  EYES-
    IMMEDI ATELY FLUSH WITH WATER FOR 15 MIN. SEEKMEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:NONE
Extinguishing Media:AS APPROPRIATE FOR SURROUNDING AREA.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS (SCBA) MAY
    BE REQUIRED IF CONTAINERS RUPTURE AND CONTENTS ARE RELEASED UNDER
    FIRE CONDITIONS.
Unusual Fire/Explosion Hazard:PRESSURIZED CONTAINERS MAY VENT, RUPTURE
    OR EXPLODE AND ADD TO FLYING AND FALLING DEBRIS. DECOMPOSITION MAY
    OCCUR.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. REMOVE OPEN FLAMES OR OTHER
    SOURCES OF IGNITION. COLLECT SPILLED PRODUCT WITH ABSORBENT
    MATERIAL AND PLACE IN CLOSED STEEL DRUMS FOR PROPER DISPOSAL.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE NEAR SOURCES OF HEAT, IN
    DIRECT SUNLIGHT, OR WHERE TEMPERATURES EXCEED 120F. DO NOT
    PUNDCTURE OR DAMAGE CONTAINERS. ROTATE STOCK.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:NORMAL VENTILATION FOR STANDARD MANUFACTURING PROCEDURES IS
    GENERALLY ADEQUATE. LOCAL EXHAUST SHOULD BE USED WHEN NEEDED
Protective Gloves:BUTYL RUBBER.
Eye Protection:CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:EYE BATH AND PROTECTIVE CLOTHES.
Work Hygienic Practices:AVOID CONTACT WITH THIS MATERIAL.  WASH HANDS
    AFTER HANDLING THIS MATERIAL.
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

HCC:V2
Boiling Pt:=47.8C, 118.F
Vapor Pres:334 MM HG
Vapor Density:6.5
Spec Gravity:1.57
Evaporation Rate &amp; Reference:>1 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS LIQUID WITH A FAINT SOLVENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ALKALI AND ALKALINE EARTH METALS, POWDERED AL, ZN, BE, OR MG.
Stability Condition to Avoid:DO NOT SPRAY NEAR OPEN FLAMES OR RED HOT
    SURFACES. DO NOT HEAT AEROSOL CONTAINERS ABOVE 120F.
Hazardous Decomposition Products:HYDROCHLORIC AND HYDROFLUORIC ACIDS
    AND POSSIBLY CARBONYL HALIDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:COMPLY WITH ALL FEDERAL, STATE AND LOCAL
    REGULATIONS. DO NOT PUNCTURE OR INCINERATE AEROSOL CANS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.