AMOCO OIL COMPANY -- AMERICAN INDUSTRIAL OIL 68  -- 9150-00F025503
<pre>=====================  Product Identification  =====================

Product ID:AMERICAN INDUSTRIAL OIL 68
MSDS Date:10/18/1989
FSC:9150
NIIN:00F025503
=== Responsible Party ===
Company Name:AMOCO OIL COMPANY
Address:200 EAST RANDOLPH DRIVE
City:CHICAGO
State:IL
ZIP:60601
Country:US
Info Phone Num:312-856-3907
Emergency Phone Num:800-447-8735
Preparer's Name:G I BRESNICK
CAGE:15958
=== Contractor Identification ===
Company Name:AMOCO OIL CO
Address:200 E RANDOLPH DR
Box:City:CHICAGO
State:IL
ZIP:60601-6401
Country:US
Phone:312-856-3907- EM HLTH: 800 447-8735
CAGE:15958

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED HEAVY
    PARAFFINIC, LUBRICATING OIL BASE STOCK
CAS:64741-88-4
RTECS #:PY8040500
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM

Ingred Name:SOLVENT REFINED HYDROTREATED HEAVY PARAFFINIC DISTILLATE,
    HYDROTREATED HEAVY PARAFFINIC DISTILLATE, LUBRICATING OIL.
CAS:64742-54-7
RTECS #:PY8035500
OSHA PEL:5 MG/CUM (MIST)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50 (RAT): >5 G/KG
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES/INHALATION: NO SIGNIFICANT HEALTH
    HAZARDS IDENTIFIED. INGESTION: EXPECTED TO BE RELATIVELY NON-TOXIC.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/PLENTY OF WATER. SKIN: WASH W/SOAP & WATER.
    INGESTION: IF LARGE AMOUNT IS SWALLOWED, INDUCE VOMITING.
    INHALATION: OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>420F
Extinguishing Media:DRY CHEMICAL, CO2, HALOGENATED AGENTS, FOAM, STEAM 
    OR WATER FOG.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PREVENT SPREADING BY DIKING, DITCHING, OR
    ABSORBING ON INERT MATERIALS. KEEP OUT OF SEWERS & WATERWAYS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NO SPECIAL REQUIREMENTS.

=============  Exposure Controls/Personal Protection  =============

Ventilation:NONE REQUIRED; HOWEVER, USE OF ADEQUATE VENTILATION IS GOOD
    INDUSTRIAL PRACTICE.
Protective Gloves:AS REQUIRED
Eye Protection:AS REQUIRED
Supplemental Safety and Health
USDA STATUS: ACCEPTABLE FOR USE AS LUBRICANT IN OFFICIAL MEAT & POULTRY
    ESTABLISHMENTS PROVIDED THERE IS NO POSSIBILITY OF THE LUBRICANT OR
    LUBRICATED PART CONTACTING EDIBLE PRODUCTS (H2 STATUS).

==================  Physical/Chemical Properties  ==================

Spec Gravity:0.88
Solubility in Water:NEGLIGIBLE
Appearance and Odor:YELLOW OILY LIQUID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2 & OTHER HARMFUL PRODUCTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS. ENCLOSED-CONTROLLED INCINERATION IS
    RECOMMENDED UNLESS DIRECTED OTHERWISE BY APPLICABLE ORDINANCES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.