TIMESAVER PRODUCTS CO -- TIMESAVER LAPPING COMPOUNDS #80N FINE -- 5350-00N019224
===================== Product Identification ===================== Product ID:TIMESAVER LAPPING COMPOUNDS #80N FINE MSDS Date:01/16/1989 FSC:5350 NIIN:00N019224 === Responsible Party === Company Name:TIMESAVER PRODUCTS CO Address:12428 HWY 99 City:EVERETT State:WA ZIP:98204 Country:US Info Phone Num:206-347-1611 Emergency Phone Num:206-347-1611 Preparer's Name:A J MENARD CAGE:2K985 === Contractor Identification === Company Name:TIMESAVER PRODUCTS CO Address:12428 HWY 99 BAY 52 Box:City:EVERETT State:WA ZIP:98204-5502 Country:US Phone:206-347-1611 CAGE:2K985 ============= Composition/Information on Ingredients ============= Ingred Name:SILICA, CRYSTALLINE - QUARTZ CAS:14808-60-7 RTECS #:VV7330000 Fraction by Wt: 20-45% OSHA PEL:SEE TABLE Z3 ACGIH TLV:0.1 MG/M3 RDUST;9293 Ingred Name:ABRASIVES; (GROUND NATURAL) Fraction by Wt: 20-35% Ingred Name:BARIUM SULFATE CAS:7727-43-7 RTECS #:CR0600000 Fraction by Wt: 25-40% OSHA PEL:15 MG/M3 TDUST ACGIH TLV:10 MG/M3 TDUST; 9293 Ingred Name:DETERGENT Fraction by Wt: 5-25% ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO Health Hazards Acute and Chronic:PROLONGED OVEREXPOSURE TO RESPIRABLE SILICA ABOVE THE THRESHOLD LIMIT MAY CAUSE SCARRING OF THE LUNGS W/COUGHING, SHORTNESS OF BREATH OR SILICOSIS. Explanation of Carcinogenicity:CRYSTALLINE SILICA: CLASS 2A (IARC) Effects of Overexposure:SEE HEALTH HAZARDS. Medical Cond Aggravated by Exposure:ASTHMA, EMPHYSEMA, GASTROENTITIS. ======================= First Aid Measures ======================= First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O2/ARTF RESP) . EYES: IMMEDIATELY FLUSH EYES W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD . SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD . ===================== Fire Fighting Measures ===================== Extinguishing Media:WATER FOG OR FLOOD. Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:FUME, VAPOR & DUST MAY OCCUR & ARE CONSIDERED TOXIC. THE PRODUCT OR DUST CAN REACT WITH STRONG OXIDIZING AGENTS. ================== Accidental Release Measures ================== Spill Release Procedures:VACUUM CLEAN. DO NOT BROOM SWEEP. KEEP IN CLOSED CONTAINER UNTIL DISPOSAL. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP IN A CLOSED CONTAINER IN A DRY PLACE. DO NOT PERMIT CONTACT WITH ACIDS, ALKALIES OR STRONG OXIDIZING AGENTS. Other Precautions:AVOID BREATHING DUST. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WHEN NECESSARY, USE NIOSH/MSHA APPROVED DUST RESPIRATOR, HEPA FILTER. Ventilation:LOCAL EXHAUST IN FRONT OF WORKER. MECHANICAL (GEN) NORMAL AIRBORNE DUST REMOVAL. OSHA APPROVED IF OVER TLV LIMITS. Protective Gloves:DESIRABLE; NOT NECESSARY. Eye Protection:DESIRABLE; NOT NECESSARY. Other Protective Equipment:IF PRLNG EXPOS TO DUST ABOVE TLV LEVELS, DISPOSABLE COVERALLS. Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== HCC:N1 Spec Gravity:2.3 Solubility in Water:INSOLUBLE Appearance and Odor:ODORLESS WHITE POWDER. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES ACIDS AND OXIDIZING AGENTS. Stability Condition to Avoid:NONE. Hazardous Decomposition Products:WHEN HEATED TO DECOMPOSITION, COMPOUNDS EMIT SULFUR DIOXIDE. ==================== Disposal Considerations ==================== Waste Disposal Methods:SANITARY LANDFILL OR OTHER EPA APPROVED METHOD. DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS . Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.