FISKE BROTHERS REFINING CO -- LUBRIPLATE "LITHIUM" SERIES, 1242  -- 9150-00N026914
<pre>=====================  Product Identification  =====================

Product ID:LUBRIPLATE "LITHIUM" SERIES, 1242
MSDS Date:06/01/1989
FSC:9150
NIIN:00N026914
=== Responsible Party ===
Company Name:FISKE BROTHERS REFINING CO
Address:129 LOCKWOOD ST
City:NEWARK
State:NJ
ZIP:07105
Country:US
Info Phone Num:201-589-9150
Emergency Phone Num:201-589-9150
Preparer's Name:ROBERT J. SIBILIA
CAGE:9N579
=== Contractor Identification ===
Company Name:FISKE BROS REFINING CO
Address:129 LOCKWOOD ST
Box:City:NEWARK
State:NJ
ZIP:07105-4720
Country:US
Phone:201-589-9150
CAGE:73219
Company Name:FISKE BROTHERS REFINING CO
Address:1500 OAKDALE AVE
Box:City:TOLEDO
State:OH
ZIP:43605
Country:US
Phone:419-691-2491
CAGE:9N579

=============  Composition/Information on Ingredients  =============

Ingred Name:NON HAZARDOUS INGREDIENTS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED SKIN CONTACT MAY
    CAUSE IRRITATION. PRODUCT CONTACTING EYES MAY CAUSE IRRITATION.
    HUMAN HEALTH RISKS VARY FROM PERSON TO PERSON. AS A PRECAUTION,
    EXPOSURE TO LIQUIDS, VAPORS, MIST S AND FUMES SHOULD BE MINIMIZED.
    THIS PRODUCT HAS A LOW ORDER OF ACUTE ORAL TOXICITY, (EFTS OF
    OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVENT
Effects of Overexposure:HLTH HAZ:BUT MINUTE AMOUNTS ASPIRATED INTO
    LUNGS DURING INGESTION MAY CAUSE MILD TO SEVERE PULMONARY INJURY.
    TLV:5 MG/ M3 (OIL MIST).
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/CLEAR WATER FOR AT LEAST 15 MIN/ UNTIL IRRIT
    SUBSIDES. IF IRRIT PERSISTS, CONSULT MD. SKIN:REMOVE ANY CONTAM
    CLTHG & WASH W/SOAP & WATER. IF INJECTED BY HIGH PRESS UNDER SKIN,
    REGARDLESS O F APPEAR/ITS SIZE, CONTACT MD IMMED. DELAY MAY CAUSE
    LOSS OF AFFECTED PART OF BODY. INHAL:VAP PRESS IS VERY LOW & INHAL
    AT ROOM TEMP IS NOT A PROBLEM.IF OVERCOME BY VAP FROM HOT PROD,
    IMMED (SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:425F,218C
Lower Limits:0.9%
Upper Limits:7.0%
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE OR WATER SPRAY
    (FOG).
Fire Fighting Procedures:COOL EXPOSED CONTAINERS WITH WATER. USE
    NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DO NOT STORE OR MIX WITH STRONG OXIDANTS.
    EMPTY CONTAINERS RETAIN RESIDUE. DO NOT CUT, DRILL, GRIND OR WELD,
    AS THEY MAY EXPLODE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCRAPE UP GREASE, WASH REMAINER WITH SUITABLE
    PETROLEUM SOLVENT OR ADD ABSORBENT. KEEP PETROLEUM PRODUCTS OUT OF
    SEWER AND WATER COURSES. ADVISE AUTHORITITES IF PRODUCT HAS ENTERED
    OR MAY ENTER SEWER	AND WATER COURSES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
    DO NOT HANDLE OR STORE NEAR HEAT, SPARKS, FLAME OR STRONG OXIDANTS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NORMALLY NOT REQUIRED. USE NIOSH/MSHA APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:USE LOCAL EXHAUST TO CAPTURE FUMES AND VAPORS.
Protective Gloves:OIL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE OIL RESISTANT APRON IF NEEDED.
Work Hygienic Practices:REMOVE OIL SOAKED CLOTHING AND LAUNDER BEFORE
    REUSE. CLEANSE SKIN THOROUGHLY AFTER CONTACT.
Supplemental Safety and Health
FIRST AID PROC:REMOVE FROM EXPOSURE AND CALL MD. INGESTION:CALL MD
    IMMEDIATELY. DO NOT INDUCE VOMITING.

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:>550F,>288C
Melt/Freeze Pt:M.P/F.P Text:SEMI-SOLID
Vapor Pres:<0.01
Vapor Density:>5
Spec Gravity:0.91-0.94
Evaporation Rate &amp; Reference:<0.01 (BU AC = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:YELLOWISH OFF-WHITE GREASE WITH MINERAL OIL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZANTS LIKE LIQUID CHLORINE, CONCENTRATED
    OXYGEN.
Hazardous Decomposition Products:IF INCOMPLETE COMBUSTION, CO. MAY FORM
    SO2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ASSURE CONFORMITY WITH APPLICABLE LOCAL, STATE
    AND FEDERAL REGULATIONS. DISPOSE OF ABSORBED MATERIAL AT AN
    APPROVED WASTE DISPOSAL FACILITY OR SITE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.